8,000+ papers published18,000+ authors published44 countriesPublishing since 2014

Manuscripts

Recent Papers

Others

Analysis and design of R.C.C. and composite structures with Steel Beam

Structural engineers are facing the challenge of striving for the most efficient and economical design solutions while ensuring the final design of a building to be serviceable for its intended function, habitable for its occupants, and safe over its design lifetime. As our country is the fastest-growing country across the globe and needs shelter with higher land costs in major cities where further horizontal expansion is not much possible due to space shortage, we are left with the solution of vertical expansion. Steel-concrete composite construction has gained wide acceptance worldwide as an alternative to pure steel and pure concrete construction. Reinforced concrete members are used in the framing system for most of the buildings since this is the most convenient and economic system for low-rise buildings. However, for medium to high-rise buildings, this type of structure is no longer economical because of increased dead load, less stiffness, span restriction, and hazardous formwork. A steel-concrete composite frame system can provide an effective and economic solution to most of these problems in medium to high rise buildings. An attempt has been made in this study to explore the cost-effectiveness of composite construction. The study concludes that composite structures can be best suited as compared Reinforced Concrete Structures

Published by: Mulla Riyaz Ahmed Jaweed Ahmed, Nikhil S. Dete, Rushikesh S. Jagtap, Madhavanand V. Raut, Kiran S. Chougule, Vinodrao V. Mulge, Deepak D. Kawale, Rahul S. Badage

Author: Mulla Riyaz Ahmed Jaweed Ahmed

Paper ID: V7I6-1374

Paper Status: published

Published: December 27, 2021

Full Details
Research Paper

Micro Small and Medium Enterprises

The paper suggests that recent market reforms and government interventions have helped enterprises beat the competition which has consequently helped India with its economic growth, high foreign investment, reduced inflation, higher employment opportunities.

Published by: Ananmey Aggarwal

Author: Ananmey Aggarwal

Paper ID: V7I6-1306

Paper Status: published

Published: December 24, 2021

Full Details
Review Paper

Medication beyond the 3 states of matter in healthcare

Plasma, the fourth state of matter, is slowly making its way into the pharmaceutical business and medicine. It's already being used in a variety of applications, including causing apoptosis, necrosis, and cell detachment, as well as in the form of CAP (cold atmospheric plasma) and Jett plasma (used for skincare). It is unquestionably regarded as a major and potentially useful tool in the future of medicine. Plasma is essentially an ionized gas, and the plasma sources employed in plasma medicine are mainly ‘low temperature' plasma sources that operate at atmospheric pressure. It eliminates reactive species and can be used on cells and tissues without causing heat damage. It eliminates reactive species and can be used on cells and tissues without causing heat damage. Low temperature is defined here as room temperature, with a tight upper limit of 50 degrees Celsius. The overall goal of this article is to provide an understanding of how much plasma that has been ionized gas can be used to cure a variety of diseases and pathological situations with minimal adverse effects. Also, to provide information about its development history, current use, and prospective future. To raise awareness that this is being thoroughly examined by research groups all over the world as part of the extremely interdisciplinary subject of 'plasma medicine.

Published by: S. Abishek Jonathan

Author: S. Abishek Jonathan

Paper ID: V7I6-1349

Paper Status: published

Published: December 24, 2021

Full Details
Review Paper

Design optimization and development of energy efficient induction motor for industrial applications

This paper In this project, A detailed analysis of the energy efficiency of the industrial motors has been presented, The energy efficiency of industrial motors has been thoroughly examined. Energy-efficient motor designs offer higher operating efficiency than standard designs, according to varying the motor design parameters presented in this project

Published by: Bilqis Fatima

Author: Bilqis Fatima

Paper ID: V7I6-1371

Paper Status: published

Published: December 24, 2021

Full Details
Research Paper

The motion of weak cylindrical shock wave in a highly viscous medium

The interaction of shock waves with viscosity is one of the central problems in the supersonic regime of compressible fluid flow. The motion of weak shock waves in a highly viscous medium has been investigated by Chester-Chisnell- Whitham method. It is found that the shock velocity and shock strength both decrease as shock advances for the low viscous region of a medium to the high viscous region. The dependence of Mach number on propagation distance, Pressure, Particle velocity, and shock velocity as well as on adiabatic index has also been analyzed for the cases. In the last comparison between the results obtained here are made mutually as well as with those obtained by other methods. The obtained expansions are computed and discussed through tables and graphs.

Published by: Dr. Kamlesh Kumar

Author: Dr. Kamlesh Kumar

Paper ID: V7I6-1317

Paper Status: published

Published: December 23, 2021

Full Details
Research Paper

Effects of Birth Order on an Individual’s Self-Efficacy and Life-Satisfaction

This research paper aimed to study the effects of birth order on an individual’s self-efficacy and life-satisfaction, within the age group of 16-30 years. Sherer’s Self-Efficacy scale was used to measure self-efficacy levels in participants and the Satisfaction with Life Scale was used to measure the levels of life-satisfaction. The purpose of this paper was to study the difference in scores on these two scales with respect to the four birth order positions considered, namely – first- born, middle-born, last-born and only child. It was found that first borns show a slightly higher level of self-efficacy, when compared with the other birth order positions. In terms of life- satisfaction, last-borns were found to score higher than the other birth order positions.

Published by: Sachi Saraf, Adwait Kapileshwari

Author: Sachi Saraf

Paper ID: V7I6-1315

Paper Status: published

Published: December 23, 2021

Full Details